APPLICATIONS:

Techwin Industrial POE (Power over Ethernet) SPD (Surge Protection Device) is specially designed for Ethernet switches. The POE switch will not be damaged by lightning overvoltage, induced overvoltage, and electrostatic discharge.

●CAT5e and CAT5 compatible

●IEEE 802.3af，803.1at

●10/100 Base-T Ethernet protection

●LAN, FDDI, CDDI, ATM,WLAN

●PDH, SDH, SPDH

●Industrial control

●Industrial POE, With High reliability and high stability

Surge protection for power supply system, SPD for low-voltage installations and device.CCTV system.

FEATURES:

●Multi. Protection circuits, Gas-Tube+ TVS technology

●Dual protection in Common mode and differential mode

●TVS array technology, low capacitance

●Multi-Strike Capability

●Patent technology

TECHNICAL PARAMETER：

Model

POE5-48-OD

Power Parameter

Working voltage Un

48V

Max. continuous operating voltage Uc

60V

Nominal discharge current（8/20µs）In

5kA

Max. discharge current  （8/20µs）Imax

10kA

Protection level （8/20µs）Up

150V

DC spark-over voltage

75V±25%

Impulse spark-over voltage

@100V/µs ≤ 500

@1000V/µs ≤ 600

Protection line

4/5, 7/8

Ethernet Parameter

Max. continuous operating voltage Uc

5V

Limiting voltage (10/700µs) Up Line-Ground

≤500V

                          Line-Line

≤20V

Nominal discharge current（8/20µs）In

3kA

Max. discharge current  （8/20µs）Imax

5kA

Adapt transmission rate

100Mbps

Insertion loss

≤0.5dB

Protection line

1/2, 3/6

Response time t_A

1ns

Connector type

2×RJ45

Mechanical characteristics

Dimension

78(H)×172(W)×159(L)mm

Weight per unit

220g

IP Level

IP65 (with waterproof duct tape applied on the cables at the entering joints)

Working conditions

Operation temp.: -20 ~ 60℃, Storage temp.: -40 ~ 85℃

Relative humidity: 5% ~ 95％

Standards Compliance

IEC61000, RoHS