IPM6000 IP to QAM/DVB-T Modulator  Main Application  IP to QAM/DVB-T modulator    support 1024 IP input through the GE port      adaptable to newly generation CATV or DTV broadcasting   system  InputInput512×2 IP input, 2 100/1000M Ethernet PortTransport ProtocolTS over UDP/RTP/RTSP, unicast and multicast, IGMP V2/V3Transmission CodeMax 840Mbps for each GE inputQAM ModulatingMuxInput Channel1024Output Channel16Max PIDs180 per channelFunctionsPID remapping(auto/manually optional)PCR accurate adjustingPSI/SI table automatically generatingScrambling ParametersMax simulscrypt CA4Scramble StandardETR289, ETSI 101 197, ETSI 103 197ConnectionLocal/remote connectionModulation ParametersQAM Channel16 non-adjacent carrierModulation Standard EN300 429/ITU-T J.83A/B/CSymbol Rate5.0~7.0Msps, 1ksps steppingConstellation16, 32, 64, 128, 256QAMFEC RS (204, 188)RF OutputInterface1 F typed output port for 16 carriers, 75Ω impedanceRF Range50~960MHz, 1kHz steppingOutput Level-20dBm~+10dBm(87~117dbµV),0.1dB steppingMER≥ 40dBACLR-60 dBcTS output16 IP output over UDP/RTP/RTSP, unicast/multicast, 2 100/1000M Ethernet PortsDVB-T ModulatingParametersChannel8Modulation StandardETSI EN300 744ConstellationQPSK/16QAM/64QAMBandwidth6/7/8 MHzTrans mode2K/4K/8KFEC1/2, 2/3, 3/4, 5/6, 7/8RF OutputInterfaceF typed output port for 8 non-adjacent carriersRF Range50~960MHz, 1kHz steppingOutput Level-15~+5dbm (for all carriers), 0.5db steppingMER≥ 40dBACL-55 dBcTS output8 IP output over UDP/RTP/RTSP, unicast/multicast, 2100/1000M Ethernet PortsSystemQAM modulating: Network management software (NMS) supportingDVB-T modulating: Web-based Network managementGeneralDemission420mm×440mm×44.5mm (WxLxH)Weight3kgTemperature0~45℃(operation), -20~80℃(storage)Power SupplyAC 100V±10%, 50/60Hz or AC 220V±10%, 50/60HzConsumption15.4W                        DVB-C Modulating Part:                                      DVB-T Modulating Part: